Evaluation of Sustainability-Oriented Route to Produce CoCrFeNi High-Entropy Alloy Spherical Agglomerates Using Hydrogen Reduction
vol.13 iss.5 (2026) pp.12 Framework Guided by Environmental Analysis for Comparing Manufacturing Alternatives in Laser Cutting
vol.13 iss.5 (2026) pp.19 Large-field-of-view, high-resolution imaging of microfeatures via geometry-optimized reattachable lens and deep learning-based super-resolution
vol.13 iss.5 (2026) pp.18 Drilling Performance of Cemented Carbide Microdrill Cutting Edges Prepared by Shear Thickening Polishing
vol.13 iss.5 (2026) pp.23 Integrated Fabrication of Glass Microfluidic Devices Using PCD Microgrinding and Calcium-Assisted Bonding
vol.13 iss.5 (2026) pp.12 Thermally and Structurally Robust Design of Through Glass via Arrays Using Multi-objective Optimization and Machine Learning-Based Geometry Prediction
vol.13 iss.5 (2026) pp.17 Strategy of Cost Reduction in Copper Chemical Mechanical Polishing: Enhancing Removal Rate and Uniformity Via a Novel Slurry Sweep Mode
vol.13 iss.5 (2026) pp.16 Thermal Behavior in Micro-Grinding of Ti-6Al-4V Using an Environmentally Friendly Nanofluid-Based Air-Flow-Assisted Electrospray Lubrication (AF-ESL)
vol.13 iss.5 (2026) pp.16 Investigation of the Machinability Characteristics Using Dry Electrostatic Cooling (DEC) for the Turning Process of SCr420H
vol.13 iss.5 (2026) pp.15 Energy-efficient Conformal Mold Cooling Using Additively Manufactured Microcellular Thermal Metamaterials
vol.13 iss.5 (2026) pp.14 Impact of Powder Reuse, Laser Scanning Strategies and Heat Treatment on the Microstructure, Mechanical, and Electrochemical Properties of LPBF 316 L Stainless Steel
vol.13 iss.5 (2026) pp.20 The Three-Dimensional Characteristics and Formation Mechanism of Microscopic Pores in Steel-Aluminum Laser Welding
vol.13 iss.5 (2026) pp.15 Study on Fretting Wear Mechanism and Optimization Technology of Aluminum Alloy Clinched Joints
vol.13 iss.5 (2026) pp.13 Ultra-High-Strength Cross-Tension Metal-Composite Joints via Wobble Angular-Laser-Structured, Injection-Molded Interlocking
vol.13 iss.5 (2026) pp.17 Non-Calcination Production of Calcium Hydroxide via Plasma-Activated Water for Sustainable Supplementary Cementitious Material
vol.13 iss.5 (2026) pp.28 Early Fault Warning Framework for Offshore Wind Turbine Pitch Systems Using Relief Feature Selection and SSA-Optimized SABiLSTM
vol.13 iss.5 (2026) pp.21 Low-Temperature O-ring Leak Testing for High Pressure Hydrogen Gas Applications
vol.13 iss.5 (2026) pp.13 Numerical Investigations of Mass Transport Improvement Techniques of Flow Channels for PEMFCs
vol.13 iss.5 (2026) pp.17 Synergistic Interplay between a Hydrophilic TiO2-Coated Microporous Layer and Flow Field Architecture for Enhanced Durability of Low-Humidity PEMFCs
vol.13 iss.5 (2026) pp.19 Design and Manufacturing of a High-Speed Motorized Spindle: Engineering Challenges and Insights
vol.13 iss.5 (2026) pp.24 Adaptive Energy Optimization Based on Fuel Cell Degradation Prediction for Fuel Cell Hybrid Electric Vehicles
vol.13 iss.5 (2026) pp.16 Revealing the structural transformation of biopolymer-modified clay materials through microtomography and hygroscopic analysis
vol.13 iss.5 (2026) pp.14 Gold Nanoparticles Synthesized by Laser Ablation in Saline Medium: An Assessment of Colloidal Stability
vol.13 iss.5 (2026) pp.28 Real-Time Structural Health Monitoring with Bayesian Neural Networks: Distinguishing Aleatoric and Epistemic Uncertainty for Digital Twin Frameworks
vol.13 iss.5 (2026) pp.15 Lean Energy Analysis for Smart Manufacturing: An Interpretable and Scalable Framework for Industrial Energy Modeling
vol.13 iss.5 (2026) pp.21 Smart Operation Platform for Railway Rolling Stock Production Using Digital Twin and AI
vol.13 iss.5 (2026) pp.25 A Representative Volume Elements-based Approach for Predicting Sintering Shrinkage in Metal Binder Jetting
vol.13 iss.5 (2026) pp.8 Next-Generation Catalysts from Spent Lithium-ion Battery Cathodes: A Sustainable Recycling Paradigm
vol.13 iss.5 (2026) pp.26 Mass Customization through Additive Manufacturing: Review of Technologies, Applications, and Scalability Challenges
vol.13 iss.5 (2026) pp.28 Material Selection and Performance Trends in Triboelectric Nanogenerators (TENG): A Comprehensive Analysis of Electrode and Voltage Outcome
vol.13 iss.5 (2026) pp.35 Challenges and Innovations in Chemical Mechanical Polishing in the More-than-Moore Era
vol.13 iss.5 (2026) pp.40 Towards Sustainable Machining: A Comprehensive Review of Energy-Reduction Strategies in Machine Tools
vol.13 iss.5 (2026) pp.45 Current Applications and Advancements in the Manufacturing of Discontinuous Fiber Composites
vol.13 iss.5 (2026) pp.38 Flow Channels—Integrated Porous Media and Foam-Based Gas Diffusion Layer-Less Flow Fields as Next-Generation Strategies for Proton Exchange Membrane Fuel Cells: A Review of Recent Advances
vol.13 iss.5 (2026) pp.20 Design Principles and Fabrication Methods for Polymeric Re-entrant Structures for Omniphobic Surfaces
vol.13 iss.5 (2026) pp.15 Research on Grinding Parameter Optimization Method Considering Sapphire Grinding Quality
vol.13 iss.4 (2026) pp.30 Flow Field Behavior and Material Removal Characteristics of Constrained-Flow-Field Force-Rheological-Polishing
vol.13 iss.4 (2026) pp.13 A Novel Hybrid Lubri-Cooling Approach for Machining of Ti-6Al-4V through Combination of Pulsated Minimal Quantity Lubrication and Dry Ice Media
vol.13 iss.4 (2026) pp.17 Performance evaluation of sustainable C/L Strategies in Milling Carpenter® 20: Towards green manufacturing with Cryo+NF-MQL and Quenched tool
vol.13 iss.4 (2026) pp.24 Innovative Approach for Rapidly Predicting Cooling Times in Aluminum-filled Epoxy Composite Injection Molding Using Numerical Simulation and Rapid Tooling Technology
vol.13 iss.4 (2026) pp.23 Temperature Field Modeling in Milling Under Tool Fatigue Damage Induced Thermal-Conductivity Degradation
vol.13 iss.4 (2026) pp.20 In-situ Alloying of Tantalum–Tungsten Via Laser Powder Bed Fusion: Microstructure, Mechanical, and Acoustic Properties
vol.13 iss.4 (2026) pp.14 AI-Based Mechanical Properties Prediction of Sintering-Aging Combined Effect in Metal-Material Extrusion
vol.13 iss.4 (2026) pp.19 Rheology-Informed Simulation Framework for Predicting Fiber Orientation in Material Extrusion Process
vol.13 iss.4 (2026) pp.20 Evaluating the Interfacial Microstructure and Mechanical Behavior of Hybrid Additive Manufactured AISI H13 Tool Steel
vol.13 iss.4 (2026) pp.15 Green Hybrid Manufacturing of 3-Dimensional Fe–6.5%Si Magnetic Cores Integrated with Insulation Layers Via Material Extrusion and Spark Plasma Sintering
vol.13 iss.4 (2026) pp.18 FDM-Based Additive Manufacturing of Stainless-Steel Electrodes Using Graphite-Assisted Sintering for Energy Storage Applications
vol.13 iss.4 (2026) pp.18 An Analytical Framework for Correlation Between Laser Powder Bed Fusion Factors and Porosity-Induced Fracture Strength and Plasticity
vol.13 iss.4 (2026) pp.41 Precision Additive Manufacturing of Dental Scaffolds Using a Hydroxyapatite/Zirconia Bioceramic Composite Derived from Discarded Eggshells
vol.13 iss.4 (2026) pp.17 Energy-Saving Solution for Hydraulic Excavators Using Electrical Boom Energy Regeneration System
vol.13 iss.4 (2026) pp.18
vol.13 iss.5 (2026) pp.12 Framework Guided by Environmental Analysis for Comparing Manufacturing Alternatives in Laser Cutting
vol.13 iss.5 (2026) pp.19 Large-field-of-view, high-resolution imaging of microfeatures via geometry-optimized reattachable lens and deep learning-based super-resolution
vol.13 iss.5 (2026) pp.18 Drilling Performance of Cemented Carbide Microdrill Cutting Edges Prepared by Shear Thickening Polishing
vol.13 iss.5 (2026) pp.23 Integrated Fabrication of Glass Microfluidic Devices Using PCD Microgrinding and Calcium-Assisted Bonding
vol.13 iss.5 (2026) pp.12 Thermally and Structurally Robust Design of Through Glass via Arrays Using Multi-objective Optimization and Machine Learning-Based Geometry Prediction
vol.13 iss.5 (2026) pp.17 Strategy of Cost Reduction in Copper Chemical Mechanical Polishing: Enhancing Removal Rate and Uniformity Via a Novel Slurry Sweep Mode
vol.13 iss.5 (2026) pp.16 Thermal Behavior in Micro-Grinding of Ti-6Al-4V Using an Environmentally Friendly Nanofluid-Based Air-Flow-Assisted Electrospray Lubrication (AF-ESL)
vol.13 iss.5 (2026) pp.16 Investigation of the Machinability Characteristics Using Dry Electrostatic Cooling (DEC) for the Turning Process of SCr420H
vol.13 iss.5 (2026) pp.15 Energy-efficient Conformal Mold Cooling Using Additively Manufactured Microcellular Thermal Metamaterials
vol.13 iss.5 (2026) pp.14 Impact of Powder Reuse, Laser Scanning Strategies and Heat Treatment on the Microstructure, Mechanical, and Electrochemical Properties of LPBF 316 L Stainless Steel
vol.13 iss.5 (2026) pp.20 The Three-Dimensional Characteristics and Formation Mechanism of Microscopic Pores in Steel-Aluminum Laser Welding
vol.13 iss.5 (2026) pp.15 Study on Fretting Wear Mechanism and Optimization Technology of Aluminum Alloy Clinched Joints
vol.13 iss.5 (2026) pp.13 Ultra-High-Strength Cross-Tension Metal-Composite Joints via Wobble Angular-Laser-Structured, Injection-Molded Interlocking
vol.13 iss.5 (2026) pp.17 Non-Calcination Production of Calcium Hydroxide via Plasma-Activated Water for Sustainable Supplementary Cementitious Material
vol.13 iss.5 (2026) pp.28 Early Fault Warning Framework for Offshore Wind Turbine Pitch Systems Using Relief Feature Selection and SSA-Optimized SABiLSTM
vol.13 iss.5 (2026) pp.21 Low-Temperature O-ring Leak Testing for High Pressure Hydrogen Gas Applications
vol.13 iss.5 (2026) pp.13 Numerical Investigations of Mass Transport Improvement Techniques of Flow Channels for PEMFCs
vol.13 iss.5 (2026) pp.17 Synergistic Interplay between a Hydrophilic TiO2-Coated Microporous Layer and Flow Field Architecture for Enhanced Durability of Low-Humidity PEMFCs
vol.13 iss.5 (2026) pp.19 Design and Manufacturing of a High-Speed Motorized Spindle: Engineering Challenges and Insights
vol.13 iss.5 (2026) pp.24 Adaptive Energy Optimization Based on Fuel Cell Degradation Prediction for Fuel Cell Hybrid Electric Vehicles
vol.13 iss.5 (2026) pp.16 Revealing the structural transformation of biopolymer-modified clay materials through microtomography and hygroscopic analysis
vol.13 iss.5 (2026) pp.14 Gold Nanoparticles Synthesized by Laser Ablation in Saline Medium: An Assessment of Colloidal Stability
vol.13 iss.5 (2026) pp.28 Real-Time Structural Health Monitoring with Bayesian Neural Networks: Distinguishing Aleatoric and Epistemic Uncertainty for Digital Twin Frameworks
vol.13 iss.5 (2026) pp.15 Lean Energy Analysis for Smart Manufacturing: An Interpretable and Scalable Framework for Industrial Energy Modeling
vol.13 iss.5 (2026) pp.21 Smart Operation Platform for Railway Rolling Stock Production Using Digital Twin and AI
vol.13 iss.5 (2026) pp.25 A Representative Volume Elements-based Approach for Predicting Sintering Shrinkage in Metal Binder Jetting
vol.13 iss.5 (2026) pp.8 Next-Generation Catalysts from Spent Lithium-ion Battery Cathodes: A Sustainable Recycling Paradigm
vol.13 iss.5 (2026) pp.26 Mass Customization through Additive Manufacturing: Review of Technologies, Applications, and Scalability Challenges
vol.13 iss.5 (2026) pp.28 Material Selection and Performance Trends in Triboelectric Nanogenerators (TENG): A Comprehensive Analysis of Electrode and Voltage Outcome
vol.13 iss.5 (2026) pp.35 Challenges and Innovations in Chemical Mechanical Polishing in the More-than-Moore Era
vol.13 iss.5 (2026) pp.40 Towards Sustainable Machining: A Comprehensive Review of Energy-Reduction Strategies in Machine Tools
vol.13 iss.5 (2026) pp.45 Current Applications and Advancements in the Manufacturing of Discontinuous Fiber Composites
vol.13 iss.5 (2026) pp.38 Flow Channels—Integrated Porous Media and Foam-Based Gas Diffusion Layer-Less Flow Fields as Next-Generation Strategies for Proton Exchange Membrane Fuel Cells: A Review of Recent Advances
vol.13 iss.5 (2026) pp.20 Design Principles and Fabrication Methods for Polymeric Re-entrant Structures for Omniphobic Surfaces
vol.13 iss.5 (2026) pp.15 Research on Grinding Parameter Optimization Method Considering Sapphire Grinding Quality
vol.13 iss.4 (2026) pp.30 Flow Field Behavior and Material Removal Characteristics of Constrained-Flow-Field Force-Rheological-Polishing
vol.13 iss.4 (2026) pp.13 A Novel Hybrid Lubri-Cooling Approach for Machining of Ti-6Al-4V through Combination of Pulsated Minimal Quantity Lubrication and Dry Ice Media
vol.13 iss.4 (2026) pp.17 Performance evaluation of sustainable C/L Strategies in Milling Carpenter® 20: Towards green manufacturing with Cryo+NF-MQL and Quenched tool
vol.13 iss.4 (2026) pp.24 Innovative Approach for Rapidly Predicting Cooling Times in Aluminum-filled Epoxy Composite Injection Molding Using Numerical Simulation and Rapid Tooling Technology
vol.13 iss.4 (2026) pp.23 Temperature Field Modeling in Milling Under Tool Fatigue Damage Induced Thermal-Conductivity Degradation
vol.13 iss.4 (2026) pp.20 In-situ Alloying of Tantalum–Tungsten Via Laser Powder Bed Fusion: Microstructure, Mechanical, and Acoustic Properties
vol.13 iss.4 (2026) pp.14 AI-Based Mechanical Properties Prediction of Sintering-Aging Combined Effect in Metal-Material Extrusion
vol.13 iss.4 (2026) pp.19 Rheology-Informed Simulation Framework for Predicting Fiber Orientation in Material Extrusion Process
vol.13 iss.4 (2026) pp.20 Evaluating the Interfacial Microstructure and Mechanical Behavior of Hybrid Additive Manufactured AISI H13 Tool Steel
vol.13 iss.4 (2026) pp.15 Green Hybrid Manufacturing of 3-Dimensional Fe–6.5%Si Magnetic Cores Integrated with Insulation Layers Via Material Extrusion and Spark Plasma Sintering
vol.13 iss.4 (2026) pp.18 FDM-Based Additive Manufacturing of Stainless-Steel Electrodes Using Graphite-Assisted Sintering for Energy Storage Applications
vol.13 iss.4 (2026) pp.18 An Analytical Framework for Correlation Between Laser Powder Bed Fusion Factors and Porosity-Induced Fracture Strength and Plasticity
vol.13 iss.4 (2026) pp.41 Precision Additive Manufacturing of Dental Scaffolds Using a Hydroxyapatite/Zirconia Bioceramic Composite Derived from Discarded Eggshells
vol.13 iss.4 (2026) pp.17 Energy-Saving Solution for Hydraulic Excavators Using Electrical Boom Energy Regeneration System
vol.13 iss.4 (2026) pp.18
